Hopefully someone has run into this before I have struck out twice now while trying to replace the lower control arm bushings on my 1971 Dart Swinger. I can’t seem to locate one that has the correct inside diameter for the shaft that goes thru the center. Am I correct in thinking that the shaft that goes thru the center of the bushing should slid on without the need of a press? I know the bushing itself gets pressed into the control arm. First I tried Moog K791 and then NAPA PCC 12193 does...
1971 Dart Swinger lower control arm bushing problem
1971 Dart Swinger lower control arm bushing problem
The post 1971 Dart Swinger lower control arm bushing problem appeared first on Classic Mopar Forums.