I just finished putting my 727 tranny back in the Demon. It will not go into any forward gear.
Here is what I did. I took the tranny out to replace a noisy pump and front seal. Other than that the tranny worked fine in all gears. When I replaced the front seal I also installed my other converter as the old one had a couple of grooves on the sealing shaft. When I installed the pump I had the front band backed off and I adjusted it to 72 inch pounds then backed it off 2 turns and locked it...
What did I do wrong?
Here is what I did. I took the tranny out to replace a noisy pump and front seal. Other than that the tranny worked fine in all gears. When I replaced the front seal I also installed my other converter as the old one had a couple of grooves on the sealing shaft. When I installed the pump I had the front band backed off and I adjusted it to 72 inch pounds then backed it off 2 turns and locked it...
What did I do wrong?
The post What did I do wrong? appeared first on Classic Mopar Forums.