timing cover and water pump confusion
Ok so we have a 360 with a drivers side water pump inlet, We need to swap to a passenger side to run the AC & other accessory drives we want. I know there may be a timing cover swap needed to but...
View ArticleTorsion bars – how to prep for paint
I am in the process of rebuilding my front suspension and plan to use my original torsion bars. I want to clean them up a little and paint them. I understood you are to be careful with torsion bars to...
View ArticleCrankcase evac. Question?
I just put a pan evac. system on my 416 Dart. It runs from valve covers to headers. Was wondering should I still run a valve cover breather or not. Your input appreciated. The post Crankcase evac....
View ArticleNOS early Pentastar for the fender
NOS early Pentastar for the fender These are the one with the stud on the back and the locating pin I have 2 styles one with like a gasket on it and other with nothing on it. I believe 62 to 66 50.00...
View ArticleWalker exhaust?
Does anyone know if Walker still makes a stock replacement exhaust for a 1969 340 Barracuda?.................thanks The post Walker exhaust? appeared first on Classic Mopar Forums.
View Articlemy motor i built
225 slant 6 1 barrel 904 automatic originally on the column now auto stick on the floor. Planning on turning the dart into a 60's era street/strip car. I've got a 360 I'm building and a 727 full manual...
View ArticleDriveshaft length. Is there a solid answer?
So I'm planning to do a slant swap on my 73 Duster. I have everything for the swap now but the driveshaft. My good friend and I want to do the transplant fairly soon. I'd rather not be down for weeks...
View Article318/727 Parts
I have a 1970 dodge dart with a 318 magnum motor and 727 transmission. The car currently does not automatically shift on its own. Ive been told im missing some part that goes from the transmission to...
View ArticleFloor plugs in trunk 65 Barracuda
Need the two large floor plugs that fit the holes in the spare tire well for a 65 Barracuda The post Floor plugs in trunk 65 Barracuda appeared first on Classic Mopar Forums.
View ArticleWhat flywheel is this?
I googled the part number and my gosh. I found everything from 143 tooth 383 to 130 tooth 360. I tried to just find the part number and obviously am google failing tonight. Little help would be...
View ArticleGRRrrr, hit a deer in the Valiant tonight……..
Right at dusk when you can't even see as well as when it is dark and you have your headlights on. She just appeared in front of the car. I got on the binders but locked 'em up and took her down....
View Article68 Dart GTS trim questions
I originally posted this in the wrong section. Sorry for the duplicate post.) Just bought a 68 Dart GTS and I have a couple trim questions. GTS emblems for fenders, hood and trunk. I have noticed that...
View ArticleWTH AMAZON PRIME?!?
Got a part number i needed from someone on this forum...checked Amazon...states in stock..."order in next 7 minutes to receive by 6/22"...ordered yesterday in my 7 minute window...selected my "PRIME"...
View ArticleDuster ignition
so my 73 duster roadkill will fire and almost idle, I threw in a new super coil and hei ignition module. But I can only start it crossing the starter posts and no charging. Alternator is on the way but...
View ArticleQuestion for Johnny in regards to 02 Bung and your opinion
I am getting ready to order headers. Somewhere in the fall I will be ordering Fuel Injection from you (not sure which yet) and want your opinion on O2 location. Will it work at the Collector Location...
View ArticleIs this too close for comfort? w/pics
I am shooting for a 17X8 rim with a 245/45/17 tire. I bought 1 of the rims I want and one tire to test it all around before I buy a whole set. This will become the spare if I pull the trigger On the...
View Article’73 Disc conversion, but keep 4″ bolt pattern
So, my dad wants to upgrade his 65 to disc brakes. He has a setup from a '73 to do the swap. But he has a set of small bolt pattern mags he wants to keep. It appears that these "Pirate Jack" rotors may...
View ArticleMotor coming need bolt info …
Hey all, Got my MRL stroker 318 coming and it's going to be mounted on a engine stand ( harbor freight ) for a bit And so I need some info on the 4 bolts and anything extra needed and perhaps some...
View ArticleCruising miss (lean)
Motor is a 360 with 340 race heads from edelbrock, edelbrock flat plain intake 750 proform. I've jetted up the front and back to 76/82 respectively. Replaced my powervalve, and cleaned the idle nipples...
View ArticleNeed some advice on suspension/rearend
71 Swinger 318 7 1/4 rear with open gears 14 inch Cragar SS wheels that have slight rust but could be rechromed or powder coated. I dont have the original wheels. Front brake disc conversion from...
View Article