gents, looking for some help with my 904.
I'm running a 3500 stall converter and manual 904 from hughes.
Now that it's nice and toasty in NC, I started to notice a slight vibration right at 2950-3100 rpm. I can ease right in/out of it while cruising under very light throttle.
I have been tinkering with the cruise timing (vacuum advance) on the Fitech, and at first thought I was throwing too much timing at it. Then she started leaking intermittenly, but only when it was pretty hot outside,...
transmission woes...
I'm running a 3500 stall converter and manual 904 from hughes.
Now that it's nice and toasty in NC, I started to notice a slight vibration right at 2950-3100 rpm. I can ease right in/out of it while cruising under very light throttle.
I have been tinkering with the cruise timing (vacuum advance) on the Fitech, and at first thought I was throwing too much timing at it. Then she started leaking intermittenly, but only when it was pretty hot outside,...
transmission woes...
The post transmission woes… appeared first on Classic Mopar Forums.